Shure ADX5BP Backplates for ADX5D

See details below for each backplate connector.

Shure ADX5BP-TA3 Standalone Backplate

The TA3 Backplate for ADX5D is designed to accommodate power input from an external source, audio output for the receiver, and optional interfacing with compatible battery sleds. The panel includes a 4-pin connector for mating with the battery sled, two TA3 (mini 3-pin XLR) audio output connectors, a 4-pin locking Hirose power input connector, and captive Phillips-head screws to mount/unmount the rear panel.

When connected, output 1 can be configured for analog or AES3 output in the device menu. Analog output 2 is disabled when AES3 is selected.

Since the receiver doesn't need to mate with an external device while being used with the standalone rear panel, a spacer plate is not required or included with the rear panel.

Connect a compatible 6-18V power supply to the power input.

Caution: Always attach backplate to receiver before connecting power supply.

Shure ADX5BP-DB25 25-Pin Backplate w/ Spacer Plate

DB25 rear panels utilize a 25-pin D-Sub connector to transmit audio, video, data, and power. This connector type is commonly used on devices that require multiple interfacing paths in a small form factor, including SuperSlot™/UniSlot® devices.

Note: See Country-Specific Functionality Restrictions.

The DB25 rear panel kit for ADX5D includes:

• A DB25 rear panel, with captive Phillips-head screws that make it easy to mount/unmount the rear panel without losing screws
• A DB25 spacer plate

Shure ADX5BP-DB15 15-Pin Backplate w/ Spacer Plate

DB15 backplates are available for devices with 15-pin connectors, such as Sony video cameras. If only one audio channel is available, the 3.5mm connector on the bottom of the front plate can be used to output audio from channel 1, channel 2, channel 1+2 stereo, or channel 1+2 summed mono.

Note: See Country-Specific Functionality Restrictions in the User Guide

The DB15 rear panel kit for ADX5D includes:

• A DB15 rear panel, with captive Phillips-head screws that make it easy to mount/unmount the rear panel without losing screws
• A DB15 spacer plate