Specifications

Acoustic transducer: Interference transducer

Directional characteristic: Supercardioid/lobe

Frequency response: 20 Hz to 20 kHz

Free-field sensitivity¹⁾:–36 dBFS

Equivalent noise level, CCIR³⁾: 21 dB

Equivalent noise level, A-weighted³⁾: 9 dB-A

Signal-to-noise ratio²⁾, CCIR³⁾: 73 dB

Signal-to-noise ratio²⁾, A-weighted³⁾: 85 dB

Maximum SPL at 0 dBFS: 123 dBSPL

Dynamic range, A-weighted⁴⁾: 114 dB



Latency:

44,1/48 kHz: 41 samples

88,2/96 kHz: 49 samples

176,4/192 kHz: 99 samples



Preset:

• Sampling rates: 48 kHz


• Gain: 10 dB


• Compressor on, Attack time 100 ms, Release time 0.5 s, Threshold –10 dBFS, Ratio 2:1

Supply voltage range: +7 V to +10.5 V

Current consumption: max. 150 mA

Weight: approx. 90 g, Diameter: 42 mm, Length: 212 mm



Interface: AES42



Remote controlled functions:

• Polar pattern⁴⁾


• Low-cut: flat, 40, 80, 160 Hz


• Pre-attenuation: 0 , -6, -12, -18 dB


• Gain: 0...63 dB in 1 dB steps, clickless


• Testsignal: 1 kHz, pink noise, white noise


• Sampling rates: 44.1, 48, 88.2, 96, 176.4, 192 kHz


• Parametric compressor/limiter (incl. de-esser function)


• Independent peak limiter avoiding any clipping


• Switch functions: soft muting, phase reverse, signal lights


• Signal lights: red⁴⁾ and blue LEDs


• System functions, firmware download

• Asynchronous operation (free-running, AES42 - Mode 1), basic frequency accuracy: ± 25 ppm


• Synchronous operation (AES42 - Mode 2), pulling range: Min. ± 100 ppm