Ambient UMP III Microphone Power Supply
Features:
- Power supply for wireless booming
- Operate the boom pole microphone on belt pack transmitters
- Weight Under 100 grams
- Rechargeable NP-50 battery
- 48 V Phantom | 12 V Phantom | 12 V T-power
- The UMP 3 is 40% smaller, in size and weight, compared to its predecessor.
Long run time
UMP stands for Universal Microphone Power Supply. The Ambient UMP series is designed to use Phantom or T-powered microphones on a “wireless boom” with typical belt pack transmitters. The 3rd generation of the UMP is not only easy to operate with one simple button, but provides a run time of several hours on every single charge depending on the microphone used.
Enough power whenever, wherever
The autonomous supply avoids additional drain of the belt pack’s batteries and ensures long battery lifetime plus making the unit compatible with any transmitter with mic-level input. Just mount the UMP III on the boom tip.
Standardized batteries for greener production
Thanks to rechargeable NP-50 batteries you can use the same batteries you already have in your kit for the Lockit, microphones or radio transmitters. Working more green on set has never been easier.
Light as a Feather
Since NP-50 batteries are much slimmer than e.g. AA batteries, the UMP III is very small. We were able to cut its volume and weight by 40 % compared to its predecessor.
High Compatibility
The UMP III is compatible with any transmitter with mic-level input. In- and output connectors let you configure them individually and are keyed against accidental interchange.
LED Interface
A 5-colored LED interface indicates battery status and selected powering modes.
Includes:
- UMP III Microphone Power Supply
- Microphone input Cable TA4-Female - 3-Pin XLR-female (UMP-IN-EMC)